POWER AMPLIFIER WITH DSP & DANTE

DSP-4060, DSP-4120, DSP-4240, DSP-4350, DSP-4500

Features:

l   4 x 60W power amplifier

l   100V, 70V,  4 Ohm & 8 Ohm output with selectors

l   Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter

l   Dante network control with 4 In 4 Out matrix

l   Two Ethernet RJ-45 network connector for both Dante and DSP configure

l   Remote GPIO for failure outputs

l   1U height 19” rack mount type power amplifier

l   Balanced line input by phoenix connector for four channels.

l   Each four inputs with separate gain control.

l   Separate four channel indicators for protection, clip, input and output.

l   Complete short circuit, overload, high temp, clip and DC protection.

l   Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections

DSP Features:

l   4 In and 4 Out DSP

l   Ethernet RJ-45 network connector for remote control

l   32 bit DSP process, 96kHZ sampling rate, 24-bit AD/DA convert.

l   Input including low cut, feedback inhibition, PEQ,noise gate, gain, mute, phase, linkage adjustment and volume adjustment.

l   Output including X-over, PEQ, Gain, mute, compressor/limiter, phase, delay, linkage adjustment and volume adjustment.

l   All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.

l   All inputs/outputs can do Matrix, and all the input and output channel name can be changed.

l   All the input and output with independent phase curve adjust function, PEQ style choose ALLPASS1 can realize 180º curve adjust, ALLPASS2 can realize 360º curve adjust.

l   All high cut, low-cut type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.

l   Noise gate’s threshold, time, ratio can be adjusted for input, compressor, limiter, ratio, time can be adjusted for outputs.

l   Max delay time 680mS for all output channels.

l   Pre setting can copy for every single channel, every channel can do link adjust.

l   Every input and output channel frequency response curve situation can be found when you are in any input and output.

l   21 presets can be save and recall, Password protection function for high level applications.

POWER AMPLIFIER WITH DSP & DANTE WESITE PAGE:

http://www.cmxaudio.com/Product/detail/id/873.html